|
| Low profile emergency surface/recessed luminaire/exit sign | ||||
 |
Manufactured from Flame-Retardant Polycarbonate, this elegantly designed IP55 Luminaire is suitable for almost any prestigious application. The Dalby can be used for surface or recessed mounting (when recessed only 25mm protrudes below the ceiling) and with the addition of a Self-Adhesive Legend, a simple but attractive Exit Sign is created. The Dalby design
also offers an Edge-Lit Exit sign version which can be confidently
specified for projects including Hotels and Reception areas. |
|||
Dalby
surface mounted |
||||
| Mains Luminaires | ||||
 |
Cat No. | Mode/Lamp | Lumens* |
Kg |
 |
||||
| DAL8 | 8W 300mm Mains | - |
1.35 |
|
| Emergency Luminaires | ||||
| Cat No. | Mode/Lamp | Lumens* |
Kg |
|
|
||||
| DA8L/NM3 | NM3 8W 300mm | 80E |
1.80 |
|
120S |
||||
180H |
||||
|
||||
| DAL8/M3 | M3 8W 300mm | 80E |
3.00 |
|
120S |
||||
180IT |
||||
|
Dalby
shown with edge lit exit legend
|
Slave Luminaires | |||
Viewing
distance 30 metres |
Cat No. | Mode/Lamp | Lumens* |
Kg |
 |
|
|||
| DAL8/#/D | 8W Slave Luminaires | 275 |
1.10 |
|
| * Emergency Lumens | ||||
| # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage | ||||
* For
other durations, specify the required time period e.g. /NM3 but
for 1 hour duration
becomes /NM1 |
||||
| Options Suffix | ||||
 /E
Economy Output /S
- Standard Output /H
High Output |
||||
| /HPF
- Power Factor Corrected /SAL3
- Self adhesive exit legend kit |
||||
| /HF
- High Frequency Ballast /ES
- Electronic start |
||||
| SAL3 provides several options for creating an | /ST
- Self Testing Luminaire /TS
- Push to Test Switch |
|||
Exit legend. Viewing
distance 34 metres |
||||
 |
||||
| Dimensions Length 355mm x Width 195mm x Depth 70mm | ||||
| Click Here To View As PDF | Cut Out Dimensions Length 335mm x Width 175mm | |||
 |